Ratatak Build Guide
Posted by on 9/12/2024 to
Assembly Instructions
Diode Remember that diodes are polarized components. Make sure to match the stripe on the diode to the stripe on the PCB. Turn over to solder then clip the excess leads. Resistors Resistors are not polarized, so place them in the
(0) Comments
EZ3PDT Build Guide
Posted by on 9/25/2023 to
Assembly Instructions
Thank you for purchasing the EZ3PDT kit! This is not a full kit for a specific type of guitar pedal, rather a starting point with common functional guitar pedal circuitry. It saves a ton of wiring, and lets you get straight to the fun part:
Cosmic ECHO Build Guide
Posted by on 9/18/2023 to
Assembly Instructions
This is an easy to intermediate build. All the components are through hole, and there's no ground plane, which makes it much easier to build than your average circuit.